Wireless Setting Bridge Mode - D-Link DAP-1155 User Manual

Section 3 - Configuration
Enable Wireless: Check the box to enable the ireless function. If you do not want to use wireless,
uncheck the box to disable all the wireless functions.
Wireless Mode: Select Bridge from the drop-down menu.
Wireless Network When you are browsing for available wireless networks, this is the name that will
Name: appear in the list (unless Visibility Status is set to invisible, see below). This name
is also referred to as the SSID. For security purposes, it is highly recommended to
change from the default network name.
802.11n only – Select only if all of your wireless clients are 802.11n.
802.11 Mode:
Mixed 802.11n and 802.11g – Select if you are using both 802.11n and 892.1g
wireless clients.
Mixed 802.11n, 802.11g, and 802.11b – Select if you are using 802.11n, 802.11g
and 802.11b wireless clients.
Wireless Type: Select Infrastructure if connecting to a wireless router or access point (most
common) or Ad-Hoc if connecting directly to another wireless client in Ad-Hoc
mode.
Site Survey: Click to display available wireless networks within range of the DAP-1155. Select
the network you want to connect to and enter any security settings required.
Wireless Network If you did not use the Site Survey option, enter the SSID or network name exactly
Name:
as it is set on your wireless router or access point.
Wireless MAC
Enabling this option allows the user to manually assign the source MAC address to packets forward by the DAP-1155. If not manually assigned,
Clone: the packet's source MAC address field will be automatically selected as the DAP-1155 MAC.
MAC Address: Enter the desired MAC address connected to your DAP-1155 to enable the clone function.
Security Mode: Refer to page 51 for more information regarding wireless security.
Enable: Enable the Wi-Fi Protected Setup feature.
D-Link DAP-1155 User Manual

Wireless Setting Bridge Mode

39