System - D-Link DAP-1155 User Manual

Section 3 - Configuration
Save Settings to
Use this option to save the current access point
Local Hard Drive:
configuration settings to a file on the hard disk of
the computer you are using. First, click the Save
button. You will then see a file dialog, where you
can select a location and file name for the settings.
Use this option to load previously saved access
Load Settings
point configuration settings. First, click the Browse
from Local Hard
button to find a previously save file of configuration
Drive:
settings. Then, click the Load button to transfer
those settings to the access point.
This option will restore all configuration settings
Restore to
back to the settings that were in effect at the time
Factory Default
the access point was shipped from the factory.
Settings:
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the Save button above.
Note: Restoring the factory default settings will not
reset the Wi-Fi Protected Status to Not Configured.
Click to reboot the access point.
Reboot the
Device:
D-Link DAP-1155 User Manual

System

30