Display Panel - HP Pavilion 14 Maintenance And Service Manual

Display panel

NOTE: These procedures are for replacing the display panel for HP Pavilion Notebook. For
procedures to replace the HP Pavilion Notebook display assembly subcomponents, see
assembly on page 98
replace the HP Pavilion TouchSmart display assembly, see
Description
Display bezel (includes 2 rubber screws)
Display panel, 35.56 cm (14 in), WLED, HD, BrightView flat display panel
IMPORTANT:
and replacement
Before removing the display panel, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Remove the panel:
If it is necessary to replace the display bezel:
1. Remove the plastic screw covers (1) and the two Phillips M2.5×3.0 screws (2) that secure
the display bezel to the display assembly.
2.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a. Flex the inside edges of the bottom edge (3), the left and right sides (4), and the top edge
(5) of the display bezel until the bezel disengages from the display enclosure.
and then Display assembly subcomponents on page
Make special note of each screw and screw lock size and location during removal
Battery on page
Display assembly on page
49).
Component replacement procedures
Display
101. For procedures to
98.
Spare part number
739355-001
734420-001
59