Display Assembly Subcomponents - HP Pavilion 14 Maintenance And Service Manual

Display assembly subcomponents

NOTE: These procedures are for replacing the display assembly internal components for the HP
Pavilion flat display models only.
Component
Webcamera/microphone module (includes adhesive and screws)
Display panel cable (includes webcamera/microphone module cable and
screws)
Antenna Kit (includes left and right wireless antenna cables and transceivers
and 2 rubber screws)
Display Hinge Kit (includes left and right hinges and rubber screws)
Display back cover (includes 2 rubber screws):
Aluminum with midnight black finish
Flyer red finish
Goji berry finish
Hazel berry finish
Mineral black finish
Pearl white finish
Raspberry finish
Regal purple finish
Revolutionary blue finish
Silver finish
Before removing the display assembly subcomponents, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
WLAN module (see
c.
Memory module (see
d.
Keyboard (see
e.
Top cover (see
Battery on page 49), and then remove the following components:
Optical drive on page
WLAN module on page
Memory module on page
Keyboard on page 62)
Top cover on page 67)
Spare part number
725665-001
734407-001
734400-001
734408-001
734405-001
734401-001
736810-001
736811-001
736809-001
726193-001
736812-001
734403-001
734402-001
734404-001
55)
53)
51)
Component replacement procedures
101