Advertisement
minutes cycle for as long as you set the timer to run. MIST indicates a shortened
(20 second) ON, 5 minute OFF time in a programmed interval. Mist cycle is 3
hours daily. Once you have finished your selection programming for the left or
right side use [+] to advance out of the left or right side into the other side.
C. Turn dial to [REVIEW]
This function allows you to view all selected programs. In the PROGRAM
REVIEW mode, you are able to view selections but not make any changes to the
programs. Use the [+] and [-] buttons to view the program # you wish to review.
D. Turn dial to [SELECT]
This function allows you to choose which program(s) you wish to run. You may
choose to run some or all of the programs which you have entered by pressing
[ADD] when the program # is illuminated on the LCD. When finished selecting,
turn dial to [PROGRAM RUN]. You MUST enter the program #'s using the
PROGRAM SELECT prior to using PROGRAM RUN. The days you have
selected will remain lit. To deselect a program press [SKIP].
E. Turn dial to [RUN]
Dial must be in this position for programs to run! This function allows you to run
the programs. With the water turned on, programs will run at their programmed
time(s). Programs must be entered using PROGRAM SELECT in order to run.
NOTE: Program will start if selected after the START TIME has been reached.
For example, if you finish manually water at 6:00AM Mon., then turn your timer to
RUN with a program scheduled to start at 6:00AM Mon.,
it will not run because the 6:00AM start time has passed. Program will run at
5
Advertisement
