Advertisement
4. To set the current day: Use the [+] and [-] buttons to scroll to the
current day of the week. When the correct day is lit, press [ENTER] to select.
B. Turn dial to [SET]
NOTE: For [PROGRAM SET] functions, use the [+] and [-] buttons to
advance/go back through the selection options. When you have reached the
desired settings, press [ENTER] to select.
NOTE: The Mist function is a program setting itself and can not be assigned to
other programs. the maximum time for the Mist cycle is 3 hours per day.
1. To enter a program:
a. First, scroll between Right (R) outlet and Left (L) outlet by depressing [+].
You may choose to program the RIGHT outlet and / or the LEFT outlet. When
you have the correct outlet highlighted you may select by pressing [ENTER].
b. Next, scroll through the program #'s by depressing [+]. To start with
Program 1, press [ENTER] when the 1 is lit (same process for 2-7 + Mist).
c. Once a program # has been entered, the start time will flash. Toggle through
the times, using the [+] and [-] buttons until you reach the desired start time.
Press [ENTER] to select.
d. After a start time has been selected, the stop time will flash. Select a stop
time in the same manner as above. Maximum time allowed is 180 minutes.
e. WATERING DAYS
Select the day(s) you would like to water. Press [ADD] to select each day de-
sired. Press [SKIP] to skip a day. When all watering days you need are
selected, press [ENTER]. You must press [ENTER] to complete your selection.
f.
MIST CYCLE (on the LCD screen following the #7)
The mist cycle is set up for 20 seconds ON, 5 minutes OFF. Enter a start
time and a stop time and the timer will continue on the ON 20 seconds, OFF 5
4
Advertisement
