Page 1
Robert Bosch Limitada Divisão de Ferramentas Elétricas GSS 23 AE Professional Via Anhangüera, km 98 CEP 13065-90 - Campinas - SP SAC Grande São Paulo (11) 2126-1950 SAC Demais localidades 0800 70 45446 www.bosch.com.br F 000 622 247 (03/08) pt-BR Manual de instruções Instrucciones de servicio Operating instructions...
General Safety Rules b) Use safety equipment. Always wear eye protection. Safety equipment such as dust Read all instructions. Failure to mask, non-skid safety shoes, hard hat, or hearing WARNING follow all instructions listed below protection used for appropriate conditions will may result in electric shock, fire and/or serious injury.
B Caution, fire hazard! Avoid overheating the f) Keep cutting tools sharp and clean. Prop- erly maintained cutting tools with sharp cutting object being sanded as well as the sander. edges are less likely to bind and are easier to Always empty the dust collector before taking control.
To remove the sanding sheet 7, grasp it at one of the Robert Bosch GmbH, Power Tools Division tips and pull it off from the sanding plate 6. English–3...
For final sanding of primers fine 180, 240, of the machine and the sanding sheet. before coating A sanding sheet that has been used for metal should not be used for other materials. Use only original Bosch sanding accessories. English–4...
According the European Guideline 2002/96/EC for Waste Electrical and carried out by an after-sales service centre for Bosch Electronic Equipment and its implemen- power tools. tation into national right, power tools...