Hitachi L-2100 Instruction Manual page 62

1 Program number can be from 1 to 9.
2 For correction, input 0. For generating a new program, input 1.
3 If pump pressure rises beyond the level set here, the pump automatically stops. ]
4 . If pump pressure falls below the level set here, the pump automatically stops.
5 Press the key until the step to be corrected appears on the screen. If the display
advances beyond that step, press the
6 When a correction is unnecessary, press the ENTER key only. The allowable
input range is 0.00 to 2.499.
7 When a correction is unnecessary, press the ENTER key. Valid flow is from 0.00
to 2.499(L-2100). Valid flow is from 0.00 to 9.999(L-2130).
8 Enter the event code. When a correction is unnecessary, press the ENTER key.
key.
4 - 18