Making calls in the team/executive/secretary configuration
Step by Step
100
Line seizure
Line seizure must be configured (consult your service
personnel). If automatic line seizure is configured, a
trunk is automatically assigned when you lift the hand-
set or press the trunk key.
Trunk keys
The programmable sensor keys on multi-line phones
function as trunk keys. Every sensor key programmed
as a "Trunk key" (key label: Transfer Trk) corresponds to
a trunk with the result that you can configure up to
six trunks in OpenStage 40 T.
As a team member, you can independently program the
following functions on sensor keys
•
Direct station select
•
Join/leave group
(not available on executive phone in an executive/se-
cretary team)
•
Ring Transfer: On/Off
(only in an executive/secretary team)
You can also program a sensor key with the function
"Forward Line" (call forwarding) for each line.
LED displays on trunk keys
LED
S
Off
T
[1]
Flashing
R
On
[1] In this manual, flashing sensor keys are identified by this icon, re-
gardless of the flashing interval. The flashing interval represents
different statuses, which are described in detail in the correspon-
ding sections of the manual.
page 67:
Explanation
– The line is in idle mode.
– Incoming call on the line
– Hold reminder is activated
– The line is on "Hold".
– The line is busy.