Panasonic KX-TDA50 Installation Manual page 122

3.3.1 Installing and Starting the Maintenance Console
cannot be displayed on a KX-DT300/KX-T7600 series PT. Characters which can be displayed on a
KX-DT300/KX-T7600 series PT are shown below in the white cells.
•
The PC will not perform any shutdown operation, or enter the power-saving system standby mode
while the Maintenance Console is connected to the PBX. To perform either of the operations above,
first close the connection to the PBX.
CAUTION
Do not remove the SD Memory Card while power is supplied to the PBX. Doing so may cause the PBX to
fail to start when you try to restart the system.
122 Installation Manual Document Version 2010-11