SECTION 3.
FREQUENTLY USED FEATURE
OPERATION
18
This section provides the basic operation of your Samsung Multimedia Telephone
SMT-i5243.
EXTENSION LOG IN & OUT
If enabled, your SMT-i5243 telephone may require you to log in before making or
receiving calls. In these cases your telephone system administrator will provide
you with an extension number, password, and the feature code used to log out.
TO LOG IN
•
Dial your extension number in the Server ID field.
•
Use the Navigation button to move down to the
Password field.
•
Dial your password in the password field (example
1234).
•
Press Login soft button.
TO LOG OUT
•
Dial the feature code provided by your administrator (for example 77).
PLACING CALLS
IMPORTANT:
Put your phone in Normal (Overlap) Mode by pressing the
Menu button, select Settings soft button and then select Application Settings,
press OK, select Call, press OK, scroll to Dial Mode, change it to Normal (Overlap)
Mode by using the Navigation Button. If your phone is in Mobile Phone mode
(Enbloc) you must always press the Call soft button after dialing the digits to send
the call.
All examples of making phone calls are based on the phone being set for
NOTE:
overlap dialing mode.
OUTSIDE CALLS
To place a call to an outside party:
-
•
Lift the handset.
•
Press an idle outside line button, line group button, or dial a line access code
to receive dial tone.
•
Dial the telephone number.
•
Hang up the handset when the call is completed.
Frequently called telephone numbers can be added to the PhoneBook.
NOTE:
When making internal and external calls from AOM (programmable buttons) list,
press the AOM soft button to access the programmable button screens. Then use
the Navigation button to scroll to and highlight the desired programmable but-
ton. Press OK to complete the call.
Home Page
[HOT DESKING]
19