Programming Personal Speed Dial Locations - Samsung OfficeServ SMT-i5243 User Manual

OfficeServ 7030
TECHNICAL MANUAL

1.7 PROGRAMMING PERSONAL SPEED DIAL LOCATIONS

You can program frequently dialed telephone numbers in a personal speed dial list. Each
station user begins with ten numbers 00–09 and may be assigned up to fifty numbers. See
your system administrator to determine the amount assigned to your station.
NOTE: Press button B for flash and button C for pause.
Display keyset users may want to hide some speed dial numbers so they will not show in the
display. Before entering a telephone number, press button E. All digits after this will be
hidden. Press button E again to begin displaying digits.
If your system uses rotary (or pulse) dialing C.O. lines, pressing button D before entering a
speed dial will cause all subsequent digits to be sent as DTMF tones until the D button is
pressed again.
ACTION
1. Press the transfer key followed by 105
Display shows
If you have no speed dial bins,
the display will be as shown
2. Dial the location number (e.g., 05)
OR
Press UP or DOWN to select the location
Press the right soft key to move cursor
3. Enter the trunk access code (e.g., 9) followed
by the number to be dialed (e.g., 4264100)
OR
Press the left soft key to return to step 2
4. Press the F button to access the next program
OR
Press the transfer key to save and exit
DISPLAY
[201] SPEED DIAL
00:
[201] SPEED DIAL
SPDBLK NOT EXIST
[201] SPEED DIAL
05:_
[201] SPEED DIAL
05:9-4264100_
1.11
Home Page
USER INSTRUCTIONS
PART 1 MAY 2010