Installation Steps; Step 1 - Netgear Router Configuration - Bosch Mastertech M-VCI Installation Manual

5 | Installation Steps | Step 1
This shows the NETGEAR pre-
configured router installed into a
network (Setup Type II) without
any pre-existing wireless router.
No network changes are necessary
for DSL/cable modem or wired
computers.
This shows the NETGEAR pre-
configured router installed as a
stand-alone device (Setup Type III)
without internet.

Installation Steps

Step 1 - NETGEAR Router
configuration (For: Types I,
II & III) (Getting Started)
Connect the NETGEAR router
f
to AC power
Disable the wireless card on
f
your computer
f Disconnect all wired network
connections
Connect the router to the
f
computer LAN port
Robert Bosch LLC M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | June 2009
f Reboot the computer
(to renew the IP address)
Open your web browser
f
f Enter http://192.168.1.1 into
your browser address bar and
press <Enter>
f Enter User Name and Password
– User Name: admin
– Password: password
Note: The router does not need
internet connection at this time.
Step 1 - NETGEAR Router
Configuration (For:
Types I, II & III) (Router
Initialization)
The first time you log into the
router it will display a greeting
screen, and a prompt For "Smart
Setup Wizard"
Uncheck: Do Not Display This
f
Message Again
f Click: Close Window
f Check: No to Setup Wizard
f Click: Next
Step 1 - NETGEAR Router
Configuration (For: Types I,
II & III) (Router Navigation)
M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | June 2009
Installation Steps | Step 1 | 6
Click: Backup Settings
f
Step 1 - NETGEAR Router
Configuration (For: Types I,
II & III) (Restore Settings)
f Click: Browse
f Browse to:
– Netgear_Config_A.cfg (File
for Type I) or
– Netgear_Config_B.cfg (File
for Types II & III)
Click: Restore
f
Wait for the progress bar to
f
indicate completion of the
restoration.
Robert Bosch LLC