Main Unit; The Unit's Display - Panasonic DMR-BW880 Operating Instructions Manual

Main unit

 
∫ Remote Control signal sensor
20
30
30
20
Distance: Within approx. 7 m in front of the unit
1 Standby/on switch (Í/I) (
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
2 Disc tray ( 16)
3 Connection for digital video (DV) camcorder (
4 Blue LED
≥It is possible to set the LED to turn on/off. (
5 Display ( below)
6 Recording indicator
7 Remote control signal sensor (

The unit's display

HDDSD
BD
1 SD card slot indicator
2 Copying indicator
3 Disc indicator
4 Drive (HDD, BD or SD) indicator
5 Remote control signal indicator

DV IN
16, 18)
60)
79)
above)
 
 
    
8 Connection for VCR, Panasonic video camera, etc.
( 60)
9 Open/close disc tray (
: SD card slot (
; USB port ( 16)
< Channel select (
= Start recording (
> Stop
? Start play
Rear panel terminals (


6 Main display section indicator
Current time/playback counter, various messages
7 Playback indicator
8 USB port indicator
9 Timer recording indicator
This indicator lights up when the timer recording standby
is activated.
   
AV2 IN

Pull to flip down the front
panel.
16)
16)
20)
24)
12–15)
 
COPY
SD USB
PLAY
  
11
VQT2X37