Software Installation - GE "Executive Series" USB 2.0 HO97864 Instruction Manual

VII.
Software installation is only required for
Windows
®
other Operating Systems, including Windows
NT, ME, 2000, VISTA, XP and any Mac
may skip this section.
1) Connect the hub to your computer.
2) Windows
and automatically run the "Add New Hardware
Wizard".
3) When the initial screen appears introducing
the "Add New Hardware Wizard", click Next.
4) Select "Search for the best driver for your
device (Recommended): and click Next.
5) When asked to select a location to search for
the drivers, use the default selection. Do not
change the location. Click Next.
6) Click Next to accept the location the driver will
be installed in.
7) On the final screen notifying you that the
driver has been installed, click Finish.

Software Installation

98 and 98 SE users. Users of all
98 and 98 SE will detect the hub
®
10
®
OS,
®