Samsung SPE-100 User Manual page 59

Factory default : Resets the system to the factory default.

- Except network parameter :
Reset the other settings except for the interface/port/DDNS/IP filtering settings.
- All : Resets all settings including the network encoder settings. (however, the
log information will not be reset)
If you reset all settings, the IP address will be defaulted to 192.168.1.100.
Configuration backup & Restore : Backs up the current system settings before

performing the restoration process. The system is automatically restarts after
backup or restoration.
Restart : Restarts the system.

4. When done, click [restart (
To perform the upgrade
1.
Click [upgrade].
2.
Click [Browse] and specify a file to
upgrade.
3.
Click [Send].
4.
The "upgrade" dialog appears where
the progression will be shown in the
bottom.
If you forcibly terminate the upgrade
M
process, upgrade will not be completed
properly.
To save the current settings and restore the backup settings
1.
Click [Backup].
The Save As dialog should appear.
2.
Specify the backup path with a proper
file name, and click [Save].
The backup file will be saved to the
specified path in the format of ".bin".
3.
To restore the backup settings, click
[restore].
)].
English _