Network Settings - LG LE2116D Owner's Manual

Output
Relay Off
- MANUAL: Use the ALM.OFF button to stop
alarm.
- POST-ALARM TIME: The alarm is stopped
after post-alarm time.
System Alarm Out: Select the number of the
RELAY-OUT terminal for the output alarm (relay)
signal below cases.
- When a cooling fan is not activated.
- When the HDD has bad sector.
- When a video signal from the camera has
stopped because of a cable disconnection or
malfunction of a camera.

Network Settings

TCP/IP
DHCP:
DHCP stands for Dynamic Host Configuration
Protocol.
- ON: Network settings of this unit are configured
automatically by the DHCP server. You can use
the DDNS function instead of the dynamic IP
address. (For more details refer to the DDNS set-
tings).
If you set to ON, the [IP Address], [Subnet Mask],
[Gateway], [Primary DNS] and [Secondary DNS]
options are dimmed and these options are not set.
- OFF: Enter the network settings manually.
IP Address: Enter an IP address using the virtual
keyboard.
Subnet Mask: Enter a subnet mask address using
the virtual keyboard.
Gateway: Enter the gateway address using the vir-
tual keyboard.
Primary DNS: Enter the Main DNS server address
using the virtual keyboard.
Secondary DNS: Enter the Sub DNS server
address using the virtual keyboard.
TCP/IP Port: Enter the TCP/IP Port number using
the virtual keyboard. You can watch the live surveil-
lance image over the network with the PC Client
program. The factory default port for transmission
of video and audio data is 9001. However in some
cases it is better to change this port number for
added flexibility or security. If desired change the
port number(1025 ~ 65535).
Web Server Port: Enter the Web Sever Port num-
ber using the virtual keyboard. You can watch the
live surveillance image over the network with a web
browser. Typically the TCP port used by HTTP is
80. However in some cases it is better to change
this port number for added flexibility or security.
If desired change the port number (80 or 1025~
65535).
Bandwidth Throttle: Enter the Bandwidth to adjust
the data traffic.
Note:
When you change the TCP/IP port or web sever port
number, all connections with the PC Client programs
or web browser will be disconnected.
33