LG LE2116D Owner's Manual page 16

5. Attach the hard disk mounting brackets with the
screws.
6. Connect the HDD power cable.
7. Connect the SATA cable.
8. Connect the SATA cable to the SATA connector
on the main board.
• When installing 1 HDD.
Connect the SATA cable of the HDD to the
first SATA connector. It is use for main system
HDD.
• When installing 2 HDDs.
1. Connect the SATA cable of the first HDD to
the first SATA connector of the main board.
It use for main system HDD.
2. Connect the SATA cable of the second
HDD to the second SATA connector of the
main board.
16
• When installing 3 HDDs.
1. Connect the SATA cable of the first HDD to
the first SATA connector of the main board.
It use for main system HDD.
2. Connect the SATA cable of the second
HDD to the second SATA connector of the
main board.
3. Connect the SATA cable of the third HDD
to the third SATA connector of the main
board.
• When installing 4 HDDs.
1. Connect the SATA cable of the first HDD to
the first SATA connector of the main board.
It use for main system HDD.
2. Connect the SATA cable of the second
HDD to the second SATA connector of the
main board.
3. Connect the SATA cable of the third HDD
to the third SATA connector of the main
board.
4. Connect the SATA cable of the fourth HDD
to the fourth SATA connector of the main
board.
9. Assemble the top case.
10. Fix the screws.
11. After installing the HDD, you must format the
HDD using the setup menu (See page 38).
Notes:
• When you add the new HDD, do not change the
position of the HDD. It may delete the current
data and cause a malfunction.
• You should install one of the HDDs on the first
connector of the main board. If you do not install
the HDD on the first connector of the main board,
the DVR will not work properly.