Hitachi BD-W3300 Instruction Manual page 91

Symptoms
Did the laundry incline to one side during spinning operation?
Operation time may become long as the operation for
correcting the imbalance of laundry is added automatically.
Did you add large amount of washing load during washing
operation?
If washing load is added in the middle, operation time may get
longer as the weight of the washing load differs from the load
measured initially.
Since the operation time may change depending on the
conditions of washing load such as type of cloth, size, air
temperature and water temperature, time left indicated in the
beginning may differ from the actual operation time.
Operation time is long
Since the time left in corrected during operation, indicator
display may change in the process.
Have you put in too much detergent?
When too much foam is generated, operation to clear up
foam is performed automatically, and the operation time may
prolong for maximum of 15 MIN.
Have you set the Hot Wash program?
Operation time may prolong automatically when Hot Wash
program is running.
Operation does not
Actual operation time may prolong from the planned operation
complete at the timer
time of the timer depending on the amount and type of
set
washing load and the amount of water supplied.
Is the washing load too much?
Is the dry filter blocked?
When the dry filter is blocked, drying time may prolong or
operation may complete with half dry.
Drying time is long
Is the tapcock turned on?
Tap water is used even when running the drying operation
only. When the water is not fed, drying time may prolong or
operation may complete with washing load half dry.
Is the screen at the water supply inlet blocked?
Flow of tap water is interrupted if the dirt is accumulated.
Please check the following items Adjustment method
For preventing the imbalance of the laundry, take necessary
precautions when putting the laundry in the drum.
It is not an error.
It is not an error.
It is not an error.
Use appropriate amount of detergent according to the control
panel display. (P.26, 27)
It is not an error.
For Hot Wash (P.65)
For timer operation (P.58)
Run the drying operation after reducing the washing load.
Operation time will reduce if heavy clothes and light clothes are
dried separately.
Clean the dry filter every time after finishing the drying operation.
(P.73, 74)
Open the water tap before starting the operation. Also check if
the water supply is disrupted or water piping, water supply hose
or drain hose have frozen. (P.99)
Remove the accumulated dirt. (P.76)
(P.19, 20)
91