UE 6000 Know your product Adjustable headband Memory foam cushions Battery LED On/Off slider Volume up Media/calling controls • One click: Play/pause (audio) Call answer/hang up (phone) • Double click: Next track (audio) • Triple click: Previous track (audio) • One click, then click and hold: Fast forward (audio) • Two clicks, then click and hold: Rewind (audio)
Page 5
UE 6000 Set up your product Pull the tab to activate batteries. Move the slider to “On.” The Battery LED turns green to indicate Active Noise Cancellation mode. Connect the headphone to begin listening to music. For devices with a ¼-inch (6.35 mm) input jack, use the ¼-inch (6.35 mm) adapter.
UE 6000 Product features Answering a call Active Noise Cancellation Battery LED No light: headphone off Green: Power on; batteries good Red: Low power; change the batteries If the power runs out, Active Noise • On your phone, the music fades and Cancellation ends and music stops.
Page 7
• Software downloads features. • Online documentation Connect with other users in our Community • Warranty information Forums to get advice, ask questions, • Spare parts (when available) and share solutions. Go to www.logitech.com/support/ue6000 English 7...
• Restart your media application. Mac® OS X (Preferences) • Sound input: Internal microphone • If the Battery LED is red, replace the • Sound output: Internal speakers 2 AAA alkaline batteries. Refer to your operating system documentation. For more information, go to www.logitech.com/ support/ue6000. 8 English...