Hitachi StarBoardLink EZ User Manual page 26

StarBoardLink EZ
(2) Adjust the length of the reflective bars so that the projection area is surrounded. Attach so that
the silver surface of the reflective bars is facing inwards, and so there are no gaps (when installing
with double-sided tape, remove the separating paper immediately before installation).
*Extend the left and right side reflective bars to the top of the digitizer.
Reflection
Bar
*If the projection size is larger than 70 inches, use 3 reflective bars on the bottom side.
*Length of the reflective bars can be
adjusted.
Projection Area
Projection Area
2-7
Assembly and Setup
English