9-42 Upgrading Your Server
Floppy Disk Drive
Your server can contain an optional floppy disk drive.
Installation
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the left side cover and front mask as described earlier in this chapter.
3.
Remove all the cables from the factory installed optical disk drive and the devices
installed in the device bay.
4.
Remove the screw securing the hard disk drive bay.
5.
Pull out the file bay from the server while pushing the release tabs on top and bottom of
the file bay.
Screw
1
Release tab
1
2
Release tab