Table of Contents
Advertisement
Table 31 Fan tray specifications
Fan tray
A10504 fan tray
A10508 fan tray
A10508-V fan tray
The fans trays are shipped with the switch, and have been installed in the switch. If the fan tray of a
switch fails, order a compatible fan tray to replace the failed one.
Mounting accessories
Before installing the switch to the rack, install slide rails to the rack. You can order an HP X421 A-Series
Chassis Universal 4-Post Rack Mounting Kit (JC665A).
An HP X421 A-Series Chassis Universal 4-Post Rack Mounting Kit (JC665A) includes cage nuts, screws,
and a pair of slide rails. The length of the slide rails is in the range of 500 mm (19.69 in) to 800 mm
(31.50 in). A pair of slide rails can bear a maximum weight of 350 kg (771.60 lb). Before you use the
slide rails, make sure that the following requirements are satisfied:
The inside depth of the rack falls into the length range of the slide rail.
•
The slide rails can support the total weight of the switch chassis and its accessories.
•
Transceiver modules
The switch supports transceiver modules. You can order transceiver modules according to the transceiver
modules supported by the LPU interfaces. For more information, see
The switch supports the following transceiver modules:
10-Gigabit XFP modules listed in
•
10-Gigabit SFP+ modules listed in
•
10-Gigabit SFP+ cables listed in
•
Gigabit SFP modules listed in
•
100-Mbps SFP modules listed in
•
Table 32 XFP module specifications
Product
code
JD117B
Number of fans
8
8
12
Table 35
Description
HP X130 10G XFP LC SR
Transceiver
Fan diameter
92 mm (3.62 in)
120 mm (4.72 in)
120 mm (4.72 in)
Table 32
Table 33
Table 34
Table 36
Central
Fiber
wavelength
diameter
(μm)
(nm)
50/125
850
62.5/125
64
Maximum
Maximum air
rotating speed
flow rate
6000 RPM
960 CFM
5200 RPM
1440 CFM
5200 RPM
1152 CFM
Table
28.
Multimode fiber
Max
modal
transmission
bandwidth
distance
(MHz*km)
300 m (984.25
2000
ft)
500
82 m(269.03 ft)
400
66 m(216.54 ft)
220
33 m (108.27 ft)
Advertisement
Table of Contents
Troubleshooting
