Watching Tv Programs; Volume, Sound Mute, Changing Program Positions, Program Return, On-Screen Information - Toshiba 42WL55A Owner's Manual

Getting started

Watching TV programs

Volume, Sound mute, Changing program positions, Program return, On-screen information

TV top view
CALL
1 2 3
4 5 6
7 8 9
0
MENU EXIT
P
DVD
MENU
OK
P
TV
VCR
DVD
Note:
The program position selection change
between different format channels takes
several seconds.
To alter the volume:
Press the + or
to raise or lower the volume.
To mute the sound:
Press the button. The word
Sound mute appears on the
screen.
Press the button again to
restore the sound.
To change program position:
Enter the desired program
position number using the
Number buttons on the remote
control.
For program positions below 10, use 0 and the required
number e.g., for program position 1.
You can also change the program position by using the P
P button.
The program position will be displayed on the screen with
the Mono/Stereo/Dual audio status.
To switch between two program positions:
You can switch two program positions without entering actual
position number each time.
Select the first program
position you want to view.
Select the second program
position with the Number
buttons (0-9).
Press the button. The
previous channel will be
displayed.
Each time you press the
forth between the two program positions.
To display the on-screen information:
Press the CALL button to
display the following on-screen
information.
The information will disappear
in 6 seconds.
• Program position or external input mode selected
• Program skip on/off information
• Label (if set)
• Mono/Stereo/Dual audio status
To erase the display instantly, press the CALL button again.
– button
Volume
Sound mute
1 MNOP
2 EFGH
3 IJKL
button, the TV will switch back and
4 ABCD
30
Mono
or
Stereo
Dual
Stereo
19