Hoist And Safety Loop; Figure 22 - Integral Safety Loop - Motorola PTP 500 Series User Manual

6.4.3 Hoist and Safety Loop

Use the integral safety loop (Figure 22) for hoisting the ODU up a mast, tower or building.
When the ODU is in position, use the safety loop as a fixing point to secure a permanent
lanyard from the mast, tower or building to the ODU, as a precaution against mounting failure.
WARNING
The safety lanyard must not exceed 1m (approx 3 ft) in length. The lanyard must be
made from a material that does not degrade in an outdoor environment.
The safety lanyard must be fixed to a separate fixing point that is not part of the direct
mounting system for the ODU.
If the safety loop or its fixing is damaged in any way or has been exposed to a shock
loading due to a fall, replace it with a new one before undertaking any further
operations.

Figure 22 - Integral Safety Loop

52
6 Installation