Reset Ip & Ethernet Configuration; Figure 96 - Confirm Reset To Factory Default Pop Up; Figure 97 - Ip And Ethernet Erased Successfully Page - Motorola PTP 500 Series User Manual

8.3 Reset IP & Ethernet Configuration
To reset IP & Ethernet configuration back to factory defaults the user should press the "Reset
IP & Ethernet Configuration back to factory defaults" button on the "Recovery Options" page
( F igure 92). The user will now be presented with a pop up box asking them to confirm the
1
action (Figure 96).

Figure 96 - Confirm Reset to Factory Default Pop Up

On confirmation the following page will be displayed (Figure 97). The user should now reboot
the unit by pressing the "Reboot" button.

Figure 97 - IP and Ethernet Erased Successfully page

The user will now be presented with a pop up box asking them to confirm the action (Figure
98).
155
8 Recovery Mode