Using
In the Hardware tab, select COM6 in the GPS hardware port drop-down list.
3.
Tap ok to close the Setting window.
4.
NOTE
Operation
Acquiring satellite signals may take a few minutes. It is best to be outside and have a clear,
unobstructed view of the sky. Without a clear view, acquisition takes much longer and could result in
the FR68 Series being unable to compute the initial position quickly. When operating the device
indoors access to the GPS signals may be limited or unavailable.
NOTE
GPS Maps on microSD Cards
GPS navigation software vendors may sell maps on microSD cards. If using a microSD card with the
GPS navigation software:
1.
Remove the Memory Card Cover on the side of the FR68 Series.
2.
Insert the microSD card into the slot.
3.
Replace the Memory Card Cover.
Downloading GPS Data
Use this function to download GPS data to enhance GPS performance. This may require additional
charge for data connection.
1. Tap Start > Program > GPSXtra icon.
2. Enter GPSXtra to download GPS data.
F
igure 3-1
If an application error message appears indicating that the COM port cannot be opened, ensure
that a free COM port is selected in the
When using a GPS navigation application, ensure that the FR68 Series does not go into suspend
mode. If the FR68 Series suspends then the power to the GPS radio is removed. Upon resume the
GPS receiver must reacquire a valid GPS signal, resulting in a delay of positional information.
Download GPS data
GPS hardware port
drop-down list.
58
Using GPS Navigation