Security - Motorola FR68 Series User Manual

3.
Select a ring tone for incoming calls from the
the selected ring tone, tap
NOTE To use custom .wav, .mid, or .wma files as ring tones, use ActiveSync on the host computer to
4.
Select a keypad tone from the
that sounds when entering a phone number on the keypad.
Select
number on the keypad.
Select
NOTE

Security

Enabling a PIN
NOTE Place emergency calls at any time, without requiring a PIN or a SIM card
To require a PIN when using the phone:
1.
From the
Security
Figure 7-12
2.
Use the touch keypad to enter a four to eight digit PIN.
3. Enter
Tap
Changing a PIN
CAUTION If you enter an incorrect PIN, the message "SIM PIN incorrect: Try again" appears. After
1.
From the
2.
Use the touch keypad to enter the current PIN.
3. Enter
Tap
. Tap
copy the file to the /Windows/Rings folder on the FR6874/FR6876. Then select the sound from
.
the ring tone list
Keypad:
Short tones Long tones
or
Off
to disable tones.
Turning off sounds saves power and prolongs battery life
7-11), select the
Phone
tab (Figure
.
Enter PIN
to enable the PIN and return to the
three consecutive incorrect attempts, the SIM card is blocked. The phone does not allow
you to attempt to enter your PIN again and you must obtain a PIN Unblock Key from your
service provider.
7-11), tap
Phone
tab (Figure
.
Ring tone:
drop-down list. To hear a sample of
to end the ring tone.
drop-down list. This selection determines the tone
to specify the duration of the sound when you press a
.
Require PIN when phone is used
Phone
tab.
Change PIN
.
105
GSM Configuration
.
check box under