Page 1
WASHING MACHINE Please read this manual carefully before operating Please read this manual carefully before operating your dishwasher. Retain it for future reference. your set and retain it for future reference. WM0642H* LD-1420T(W,B)2 LD-1421T(W,B)2 www.lg.com P/No. : MFL62077181 P/NO : MFL31245123...
ONTENTS SAFETY AND CAUTION INSTALLATION INSTRUCTIONS PARTS NAME FUNCTION OF CONTROL BUTTON BEFORE USING FOR THE FIRST TIME INFORMATION FOR ENERGY TEST HOW TO USE AND OPERATE OPERATING SEQUENCE PROGRAM USER MAINTENANCE INSTRUCTIONS TROUBLE SHOOTING GUIDE SPECIFICATION...
AFETY AND CAUTION IMPORTANT SAFETY INSTRUCTIONS WARNING - When using your dishwasher, follow basic precautions, including the following: • Please read this manual carefully before using mains using new hose-sets and that old hose- sets should not be reused. the dishwasher for the first time. •...
Page 4
AFETY AND CAUTION CAUTION concerning the Power Cord We recommend that most Appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.
NSTALLATION INSTRUCTIONS WARNING A qualified electrician/plumber or competent person should carry out any electrical/plumbing work required to install this appliance. Step 1 : Step 2 : PREPARE CUPBOARD OPENING PREPARATION FOR ELECTICAL WIRING CAUTION This dishwasher is designed to fit the size shown as below.
NSTALLATION INSTRUCTIONS Step 3 : Step 4 : PREPARING THE DISHWASHER INSTALLING THE FOR INSTALLATION DISHWASHER IN CUPBOARD Lay the dishwasher on its back. Before sliding the dishwasher into the cupboard opening, all necessary height Adjust the legs to the required height and balancing adjustments should be as shown in below figure.
NSTALLATION INSTRUCTIONS Step 5 : When the drain hose is connected to a separate standpipe, it is essential that an INSTALLATION OF DRAIN HOSE airtight connection be made. Refer to Fig.B If the end of drain hose does not fit to the drain line, use a rubber connector(not supplied) that is resistant to heat and detergent.
NSTALLATION INSTRUCTIONS Step 6 : Step 8 : CONNECTION OF WATER INLET HOSE HOW TO LEVEL THE DISHWASHER Connect the water supply hose to the water tap. (Some models consist of an inlet valve and hose.) After installing the dishwasher, you may notice a slight sticking of the door to the dishwasher, After connecting the inlet hose to the tap, turn when you open or close the door.
ARTS NAME 1. Control Panel 11. Upper Rack 2. Door Handle 12. Cutlery basket 3. Front Cover 13. Detergent and Rinse Aid Dispenser 4. Lower Cover 14. Vapor Vent Cover 5. Display Window 15. Upper Spray Arm 6. Power Button 16.
UNCTION OF CONTROL BUTTON MODEL : LD-1420T(W,B)2 Program MODEL : LD-1421T(W,B)2 Program...
Page 11
Indicator Time Left Beep On/Off Rinse Half Load Delay Start Spray Power Child Lock Cool Dry Indicator Time Left Beep On/Off Rinse Half Load Delay Start Spray Power Child Lock...
Page 12
UNCTION OF CONTROL BUTTON Program • To select a program, press this button. UV (Selected models only) • If you want to sterilize the dishes, press UV button before starting. • UV can be used in both the option programs(Course+UV) and single program(UV). •...
EFORE USING FOR THE FIRST TIME 1. Adding Rinse Aid For filling To fill the Rinse Aid chamber, rotate the round cap counter clockwise and remove. Fill the container to the maximum level with a good quality Rinse Aid, then replace and lock the cap. The Rinse Aid is automatically dispensed during the final rinse cycle.
NFORMATION FOR ENERGY TEST (AS/NZS 2007) Appliance loaded in accordance with 3. Upper Rack standard specifications. • Capacity : 14 place settings • Comparability course : Eco 50 & Spray : Strong • Rinse Aid setting : 3 • Reference cleaner : 22g of detergent onto the inside surface of the door and fill 10g into the detergent dispenser.
OW TO USE AND OPERATE For better washing performance, always load 1. Cutlery Rack the dishwasher according to the instructions. The cutlery rack is best suited for flatware and most cooking or serving utensils. Before loading items into the dishwasher •...
OW TO USE AND OPERATE The basket can be split along its length, Removable Cutlery Rack increasing the lower rack’s loading versatility. The entire cutlery rack can be removed if more space is needed on the upper rack for larger items.
OW TO USE AND OPERATE Take care not to obstruct the rotation of the 4. Upper Rack spray arms and ensure that large items do not It is best to load this with more delicate items prevent the detergent dispenser lid from opening.
Page 18
OW TO USE AND OPERATE The knife rack (on some models) or extra cup Adjusting the height of the upper rack rack provides support for long steam glasses. The height of the upper rack can be adjusted when you load glasses with long stems or tall crockery items.
OW TO USE AND OPERATE 5. Adding Detergent • Detergent must be put into the detergent chamber before starting every program except Push latch to open the Pre Wash. The dispenser will not activate on a Pre Wash cycle. • Please follow the manufacturer’s instructions within the manual, when determining the correct amount of detergent to use.
Page 20
OW TO USE AND OPERATE 6. Refilling WARNING The detergent used is a special For refilling Rinse Aid Dishwasher detergent and like all Depending on the dosage setting and the household chemicals it should be number of washes, the chamber may need to treated as harmful and kept out of be topped up, approximately once a month.
Page 21
OW TO USE AND OPERATE 7. Drying 8. Dual Wash To assist drying, we recommend that the The spray intensity of the upper and lower door be partially opened after the cycle. racks can be adjusted separately depending The display will indicate "Cd"(cool dry) for on soil level or type of dishes loaded on each a further 30 minutes after the end of the rack.
PERATING SEQUENCE the remaining time. Press the “Power” button The remaining time may vary due to extraneous conditions. Check there is rinse aid The time in the display window will start to decrease minute by minute. The corresponding indicator lights will If the door is opened during the program illuminate if refilling is required.
ROGRAM Running time may vary according to the water temperature, water pressure and voltage. Running time doesn’t include “Cool Dry - 30min”. Wash Rinse Cool Program Heating Pre Wash Pre Wash2 Main Wash Rinse Rinse Dual Wash Auto Eco 50 Gentle Quick Pre Wash...
SER MAINTENANCE INSTRUCTIONS To prevent operating trouble, and poor washing results, it is important to check filters and spray arms at regular intervals. Filters Lower Spray Arm • Remove the lower rack first. • Check that the water jet holes are not blocked.
ROUBLE SHOOTING GUIDE If a problem occurs check below to see whether this can be solved. In the unlikely event that the problem cannot be rectified, please contact a service engineer. Problem Possible Causes Solution • Plug is not properly inserted into the socket.
Page 26
ROUBLE SHOOTING GUIDE Problem Possible Causes Solution • Straighten hose(s). • The drain hose is kinked. The display shows "OE" • Clean the filter. • The filter is clogged. code. (Water is not • If you can not solve • Motor trouble. pumped away.) the problem, call for (Washing motor or Drain motor)
Page 27
ROUBLE SHOOTING GUIDE These are not error codes indicating a malfunction. Code Description This indicates there was a power failure. This function protects The display shows the dishwasher in the event the power goes out or the power to “PF” code the unit is disrupted.
PECIFICATION Capacity 14 Place settings Weight See rating label Power Supply See rating label Power Consumption See rating label Water Feed Pressure 0.05 ~ 0.6 MPa The maximum permissible inlet water pressure, in megapascals The minimum permissible inlet water pressure, in megapascals (if this is necessary for the correct operation of the appliance)
Page 32
You may also find user manual in video version at following link www.guidelg.com/dishwasher...