Pioneer SPH-DA210 Operation Manual page 73

Appendix
Symptom
The display is very dim.
No sounds are produced from an
audio source.
The volume level will not rise.
The person on the other end of
the phone call cannot hear the
conversation due to an echo.
There is no picture.
Nothing is displayed and the
touch panel keys cannot be
used.
Problems with the audio screen
Symptom
iPod cannot be operated.
No sounds are produced.
The volume level will not rise.
Music in an iPod cannot be
played.
Problems with the phone screen
Symptom
Dialing is not possible.
Cause
Picture quality adjustment of the dis-
play is not correct.
The volume level is low.
The mute is on.
A speaker lead is disconnected.
The voice from the person on the oth-
er end of the phone call is output
from the speakers and then picked
up by the microphone again, creating
an echo.
The parking brake cord is not con-
nected.
The parking brake is not applied.
The backlight of the LCD panel is
turned off.
The setting for the rear view camera
is incorrect.
The shift lever was placed in [R]
when the rear view camera was not
connected.
Cause
The iPod is frozen.
An error has occurred.
Cables are not connected correctly.
A playable music is not selected.
Cause
Your mobile device is out of range for
service.
The connection between the mobile
device and this product cannot be es-
tablished now.
Action (Reference)
Adjust the picture quality. (Page 67)
Adjust the volume level.
Turn the mute off.
Check the connection.
Use the following methods to reduce the
echo:
—Lower the volume on the receiver
—Have both parties pause slightly before
speaking
Connect the parking brake cord, and ap-
ply the parking brake.
Connect the parking brake cord, and ap-
ply the parking brake.
Turn on the backlight. (Page 71)
Select the appropriate setting for the rear
view camera.
Select the correct polarity setting for
"Camera Polarity". (Page 66)
Action (Reference)
Reconnect the iPod with the suitable
cable.
Reconnect the iPod with the suitable
cable.
Connect the cables correctly.
Select music using the search function.
Action (Reference)
Retry after re-entering the range for ser-
vice.
Perform the connection process.
Appendix
73
En