Pioneer SPH-DA210 Operation Manual page 11

About AppRadio
❐ When you make hands-free phoning or use
your iPhone with Lightning connector as a
Bluetooth audio device, you must make the
Bluetooth connection, but do not have to
make the wired connection. The Bluetooth
audio sound may not output sometimes
when iPhone is wired.
Disconnecting your iPhone
Pull out the iPhone cable after check-
ing that no data is being accessed, and
disconnect Bluetooth connection.
Connect your iPhone with 30-pin
connector
Using the separately sold USB interface cable
for iPod / iPhone (CD-IU201N) enables you to
connect your iPhone to this product.
❐ Connection via a USB hub is not possible.
1 Set "App Connection Settings" to
" " before connecting your iPhone
Others
with 30-pin connector.
Ü For detailed procedures, refer to Setting the
type of the mobile device to be connected on
page 63.
2 Unlock your iPhone and then connect
the iPhone to this product.
The [Apps] and [iPod] icons on the Home
screen change to active, and you are now
ready to use the AppRadio Mode and to play
iPod contents.
Ü For details of AppRadio Mode, refer to
Chapter 7.
Ü For detailed procedure of playing iPod con-
tents, refer to Chapter 5.
❐ When you make hands-free phoning or use
your iPhone with 30-pin connector as a
Bluetooth audio device, you must make the
Bluetooth connection, but do not have to
make the wired connection. The Bluetooth
audio sound may not output sometimes
when iPhone is wired.
Ü For detailed procedures, refer to Regis-
tering your Bluetooth devices on page
31.
Disconnecting your iPhone
Pull out the iPhone cable after check-
ing that no data is being accessed.
Connect your Android device (HDMI
connection/MHL connection)
Using the separately sold App Connectivity Kit
(CD-AH200) enables you to connect your
Android device to this product.
1 Set "App Connection Settings" to
" " before connecting your Android
Others
device.
Ü For detailed procedures, refer to Setting the
type of the mobile device to be connected on
page 63.
2 Unlock your Android device and
connect the Android device to this product.
The [Apps] icon on the Home screen chang-
es to the active state for Android device, and
you are now ready to view the screen image of
the Android device (App Mode).
Ü For details of App Mode refer to Chapter 7.
❐ The cable connection method varies depend-
ing on your device.
Ü For details, refer to the App Connectivity
Kit (CD-AH200) manual.
❐ Follow the next procedure only when you use
the AppRadio Mode.
3 Register your Android device and con-
nect it to this product via the Bluetooth
wireless technology.
Ü For detailed procedures, refer to Registering
your Bluetooth devices on page 31.
The [Apps] icon on the Home screen chang-
es to the state for the AppRadio Mode, and
you are now ready to use the AppRadio
Mode.
Ü For details of AppRadio Mode, refer to
Chapter 7.
Chapter
02
11
En