Fitting The Cutting Unit - Husqvarna Rider Pro 18 AWD Operator's Manual

Fitting the Cutting Unit

WARNING!
Wear protective glasses when
assembling the cutting unit. The
spring that tensions the belt can
fly off and cause
personal injury.
1. Place the Rider on a flat surface and apply the
parking brake. Check that the lever for setting
the cutting height is in the lowest position.
Ensure the anti-scalp roller is fitted on the
cutting unit (1).
2. Grasp the handle on the front of cutting unit's
frame (2) and push the unit in under the Rider.
Make sure the tongue (3) on the unit mates
correctly.
3. Fit the screw and secure with a locking pin.
WARNING!
Observe caution to avoid
trapping your hand.
4. Place the belt over the runner pulley and behind
the adjuster pulley.
5. Press down the frame and secure with the split
pin. Fit the drive belt around the unit's drive
pulley.
6. Hook in the height adjustment stay.
MAINTENANCE
3
1
2
6017-159
8009-595
6017-120
8009-596
8009-699
43
English –