Setting The Alarm Time - Silvercrest SWEP 500 A1 Operating Instructions Manual

GB/CY

Setting the alarm time

You can set two alarm times in your world receiver.
Alarm function
Radio
Acoustic signals
Switched off
• With the radio switched off, press the buttons
The screen shows the most recently set alarm time and the symbol for
the alarm type.
• Press the
at minute intervals. Hold down one of the buttons for a few seconds to
move the setting forward or backward quickly at 10 minute intervals.
• Press the
(see table above) is indicated on the screen.
• Press the
alarm to sound:
You can select between workdays (Mo, Tu, We, Th, Fr), weekends (Su, Sa),
the whole week (Su, Mo, Tu, We, Th, Fr, Sa) or a single weekday.
The selected setting is shown on the display.
• Press the
SNOOZE
the
Symbol on the screen
No symbol
UP DOWN
or button to move the alarm time forward or backward
Vol.+/AL–1 Vol.–/AL–2
(or
SNOOZE
button to set the weekday on which you want the
SNOOZE
button until the desired alarm days are set. Hold down
button until the screen shows an individual week day.
Vol.+/AL–1
) button until the desired alarm function
- 20 -
Vol.-/AL–2
(or ).