Hitachi TM3000 Instruction Manual page 195

NOTE : The magnification embedded in the saved image is a magnification based on the
observation image display on the observation screen.
NOTE : If the observation mode [L] mark (see 4.3.6 5.) or the image mode [S] [D] [T] mark
(see 4.3.5 2.) is displayed in the information area, similarly those marks are also
embedded in the saved image.
2b. File name
When saving an image, an image number or an observation magnification can be used as a
file name.
(1) Use Image Number
Uses the image number displayed in the information area as the file name for a saved image.
If a check mark is not placed or an image number is not displayed in the information area,
the file name will be [Image].
(2) Use Magnification
Appends a magnification to the file name for a saved image. If either Quick Save or Save is
executed, the file name on the Data Save screen is indicated as [file name + (xMMM)]. If the
Save is executed from Digital Zoom, the file name on the Data Save screen is indicated as
[file name + (D xMMM)]. A magnification value higher than 1000 is denoted by xM.Mk; that
higher than 10000 is indicated as xMMk.
NOTE : The file name for a saved image can be edited and specified on the Save Image
window.
Figure 4.3.25-12 File Name Block
4 - 82