HP NetServer LC 2000r Installation Manual page 38

Chapter 3
6. To remove the left side cover, use the key provided to unlock the Mass
Storage Cage and release the left side cover.
7. Loosen the thumbscrew on the front of the chassis for the left side cover
and then pull the cover forward to disengage it.
8. Move it to the left and away from the chassis. See Figure 3-7.
9. If necessary, remove the right side cover by loosening its thumbscrew on
the front of the chassis.
The right cover does not provide any additional access to the interior,
except the right side of the mass storage drives and the control panel board.
10. Pull the cover forward and then slightly sideways to disengage it.
11. Move it to the right and away from the chassis. See Figure 3-7.
Left
Cover
Cover Pull
Figure 3-7. HP NetServer LC 2000 Covers
30
Opening and Closing the HP NetServer
Right Cover
Thumbscrews (2)