Maintenance
Audio menu
audio
Mute
Volume
Balance
Treble
Bass
Audio input select
Internal speakers
Reset audio settings
Setup menu
setup
Language
Lamp saver
Projector position
Enable sources
Timeout for menu
66
Stops the audio output.
Changes the loudness of the audio.
Changes the loudness of the left and right audio.
Changes the loudness of the higher frequencies.
Changes the loudness of the lower frequencies.
Selects the audio input source, independent of the
video source.
Sets whether the built-in speakers are active. Useful
when the audio output is connected to an external
audio system.
Resets the audio settings to the default values.
Selects the language for the menus.
Sets a lower light output for longer lamp life.
Adjusts the image to match the orientation of the
projector: upright or upside-down, in front of or
behind the screen. Inverts or reverses the image
accordingly.
For each input source, sets whether it is searched or
ignored when the projector searches for an input.
Sets how long the on-screen menu waits for input
before it closes.
Reference Guide