To Turn The Projector Off; To Operate The Remote Control - HP xp8010 series Reference Manual

To turn the projector off

■
Press the power button on the projector or remote control to turn off the projector.
The power button blinks until the cool-down cycle completes.
Å
WARNING: Do not unplug the power cord or turn off the main disconnect switch until the
cool-down cycles completes and the power button turns off. Failure to follow this precaution
can result in damage to the projector.

To operate the remote control

■
To turn the project on or off, press the power button
■
To turn on the laser pointer, hold down the blue laser ring
■
To hide or unhide the projected picture, press the hide button
■
To switch to a different connected input source, press the source button
■
To operate as a mouse on a computer, tilt the mouse button
and press the left-click
connection between the projector and computer.
Reference Guide
2 2
or right-click button. This feature requires a USB
Installation and Setup
5
.
6
.
3
.
4
7
to move the pointer,
.
25