System Configuration Menu; Diagnostics Menu - HP HDX 18 Maintenance And Service Manual

System Configuration menu

Select
Language Support
Boot Options
Button Sound (select models only)
Virtualization Technology
Processor C4 State

Diagnostics menu

Select
Hard Disk Self Test
Secondary Hard Disk Self Test
(select models only)
Memory Test
Setup Utility
To do this
Change the Setup Utility language.
Set the following boot options:
■ f10 and f12 Delay (sec.)—Set the delay for the f10 and f12 functions of the
Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
■ CD-ROM boot—Enable/disable boot from CD-ROM.
■ Floppy boot—Enable/disable boot from Floppy.
■ Internal Network Adapter boot—Enable/disable boot from Internal
Network Adapter.
■ Boot Order—Set the boot order for:
❐ USB Floppy
❐ ATAPI CD-/DVD-ROM Drive
❐ Hard drive
❐ USB Diskette on Key
❐ USB Hard drive
❐ Network adapter
Enable/disable the Quick Launch Button tapping sound.
Enable/disable the processor Virtualization Technology.
Enable/disable the processor C4 sleep state.
To do this
Run a comprehensive self-test on the hard drive.
✎
On models with two hard drives, this menu option is called the
Primary Hard Disk Self Test.
Run a comprehensive self-test on a secondary hard drive.
Run a diagnostic test on the system memory.
5–4