Recording Video Clips - HP PhotoSmart 945 User Manual

Recording Video Clips

1
Rotate the
Video
2
Frame the subject for your video in
the active display.
3
Press the Shutter
down to measure and lock focus
(exposure is continually measured
and adjusted during recording).
4
To start recording, press the
and release it. A counter and
display.
5
To stop recording, press the
again. Otherwise, the camera will automatically stop
recording when the maximum video clip length of
approximately 1 minute is reached, or the memory card is
full, whichever comes first (note that maximum clip length
can vary depending on scene content).
After recording has stopped, the first frame of the video clip
and
PROCESSING...
processing, you can delete the video clip by pressing the
button. You can use
taken. See Play
NOTE
If you use the zoom, motor noise from optical zooming
will be recorded in the audio portion of a video clip. Thus,
for best audio quality, do not use the zoom while
recording video.
Chapter 2: Taking Pictures and Recording Video Clips
Mode selector to
mode.
button halfway
appear on the active display. While it is
Playback
on page 64.
Shutter button all the way down
REC appear in the active
Shutter button all the way down
to review the video clips you have
OK
29