HP PhotoSmart 945 User Manual page 106

Message
PROCESSING...
CHARGING
FLASH
FOCUS TOO FAR
and blinking
FOCUS TOO
CLOSE
Blinking
106
Possible cause
The camera is
processing data,
such as saving
the last picture
you took.
The camera is
recharging the
flash.
The focus
distance is
beyond where
the camera can
focus in MACRO
mode.
The focus
distance is closer
than the camera
can focus in
MACRO mode.
The focus
distance is closer
than the camera
can focus without
being in
MACRO mode.
HP Photosmart 945 User's Manual
Solution
Wait a few seconds for the
camera to finish
processing before taking
another picture or pressing
another button.
It takes longer to charge
the flash when the
batteries are low and in
dark scenes. If you see this
message a lot, you may
need to replace or
recharge the batteries.
Set the camera to
NORMAL focus.
Move closer to the
subject (within the range
of MACRO
see page 36).
Move further away from
the subject
(within the
range of MACRO
.
see page 36)
Set the camera to
focus or move
MACRO
farther away.
focus -
focus -