Unloading Images To A Computer Using The Dock - HP 320 Series User Manual

Unloading images to a
computer using the dock
NOTE
If you are using a Macintosh computer, switch the
camera to
found in the
1
Check that the HP Camera Dock is connected to your
computer.
2
Place the camera in the HP Camera Dock. It will turn on
automatically, and a dock intro screen will appear.
3
Press the
process. The HP Image Unload software will launch on your
computer, and the images in the camera will automatically
unload to the computer. If there were any images on the
camera that had been selected in the
printing or e-mail, those actions are started after the images
have been unloaded to the computer.
4
The camera will return to the dock intro screen when your
images have been saved and shared. You can now take the
camera out of the dock, or leave it there to recharge the
camera batteries.
Appendix B: Camera dock
Disk Drive Disk Drive in the
Disk Drive Disk Drive
Setup Setup menu.
Setup Setup
button on the dock to start the unload
USB Configuration USB Configuration
USB Configuration USB Configuration
Share Share
Share Share
menu
menu for
65