Product Safety Precautions - Siemens CMTC1515 User Manual

Product Safety Precautions

1 Product Safety Precautions
6
Siemens Building Technologies
Fire & Security Products
Follow all warnings and instructions marked on the product.
Do not use this product near water.
This display should be installed on a stable horizontal base.
When cleaning, use only a neutral detergent cleaner with a soft damp cloth. Do
not spray with liquid or aerosol cleaners.
Do not expose this monitor to direct sunlight or heat. Hot air may cause damage to
the cabinet and other parts.
Adequate ventilation must be maintained to ensure reliable and continued
operation and to protect the monitor from overheating. Do not block ventilation
slots and openings with objects or install the monitor in a place where ventilation
may be obstructed.
Do not install this monitor near a motor or transformer where strong magnetism is
generated. Images on the monitor will be distorted and the color irregular.
Do not allow metal pieces or objects of any kind fall into the monitor through
ventilation holes.
Do not attempt to service this unit yourself. Removal of the monitor cover may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel in the event that:
1. Liquid is spilled into the product or the product is exposed to rain or water.
2. The product does not operate normally when the operating instructions are
followed.
3. The product has been dropped or the cabinet has been damaged.
4. The product exhibits a distinct change in performance, indicating a need for
service.
5. The power cord or plug is frayed or damaged.
1715 Monitor UG_EN.doc
06.2004