Acer Supra 818PD Operation Manual page 22

___________________________________________________________________________
4. When moving the machine, it should be properly positioned on a forklift as shown on
figures below. Also, pay attention to the machine stability and its gravity-balance.
3.3.2 LIFTING UNPACKED MACHINE:
1. The loading capacity of the lifting equipment must exceed the machine weight. It is
suggested to keep lifting height not exceed 12cm from the floor.
2. The machine should be properly positioned on a forklift, shown as above figure. Make
sure the machine base must be well supported by the forks, and is stable enough.
3. For machine weight, refer to page 3.3
3-5
818~2040 PD