HP A165890669 User Manual page 30

Using Your CD–ROM Drive
Table 2–1. CD–ROM Drive Operating Controls and Features
Control/Feature
Eject Button
Busy Indicator
Disc Loading Tray
Emergency Eject
2–4
Purpose
Press the Eject Button to eject the disc tray. When the drive is in
use, you must unmount the disc before ejecting it. Refer to the
subsection "Unmounting a CD–ROM disc" for instructions on
umounting a disc.
The Busy Indicator lights during a data access operation and
blinks during a data transfer. The indicator stays out when there is
one of the following:
Defective disc
Disc insertion error (for example, an upside–down disc)
No disc present
Tray for loading the disc. Eject the disc tray to insert or remove a
disc. The tray does not open if the drive power is off.
By inserting the end of a paper clip, you can eject the disc tray if
the workstation does not have power.