Prepare The System - HP A165890669 User Manual

Introduction

Prepare the System

Perform the following steps to prepare the system for the CD–ROM drive installation:
1.
Determine the existing SCSI–2 address settings currently in use on your system.
Before installing the drive, determine which SCSI–2 ID address settings are already
being used on your system by completing the following substeps:
2.
If you are using HP–UX 9.05, enter the following at the prompt:
After a few moments the ioscan utility lists all of the SCSI I/O devices it could find.
If there is a SCSI CD–ROM drive in the list, that listing appears similar to the fol-
lowing:
H/W Path
====================================
2.0.1.2.0 scsi
If you are using HP–UX 10.0, enter the following at the prompt:
1–10
/etc/ioscan –d scsi
Description Status
ok(nnnnnnnn)
/usr/sbin/ioscan –d sdisk
RETURN
RETURN