Time/Date - Bosch Divar 700 Series Installation And Operation Manual

Divar 700 Series
6.1.2

Time/date

Figure 6.2 Configuration menu - International - Time/date
–
–
–
–
–
–
Note:
If synchronizing manually and the actual time is put back more than 10 minutes, all video
content on the hard drive is deleted (a prompt is given). If put back less than 10 minutes,
recording continues but the timestamps stored with the video frames are manipulated.
The timestamps are incremented with 1/90000
time has reached the timestamp value of the most recently stored video frame (from before
the time was put back). Because of this, the video stream can still be played in sequence.
If the actual time/date is put forward, the clock moves forward to the given value without
further consequence.
Bosch Security Systems
Select a Time zone from the list (daylight saving time is adjusted accordingly).
Select either a 12-hour or a 24-hour clock Time format.
Fill in the actual Time.
Select a Date format which shows either the month (MM), the day (DD), or the year
(YYYY) first.
Enter the actual Date.
Set Daylight Saving to Automatic to enable it. Set to Manual and fill in the day, month,
and time of both Start and End time, and the Offset if it differs from the information
associated with your time zone.
Installation and Operation manual
Advanced configuration menu | en
th
of a second for each frame until the DVR700
F.01U.140.955 | v3.0 | 2009.11
59