Fujitsu ETERNUS DX200 S3 Configuration Manual page 69

Chapter 4 Connecting Cables
4.4 Power Cord Connection
4
Connect the plugs on the other end of the power cords (AC input cables) that are attached to the power
distribution unit to sockets.
Power supply failure can be prevented by connecting the power cords (AC input cables) on the power
distribution unit #0 side and the power distribution unit #1 side to different power sources.
Power
distribution
unit#1
Power
distribution
unit#0
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Connect to power outlets.
69
Copyright 2014 FUJITSU LIMITED
AC input cables
P3AM-7652-02ENZ0