Advertisement
Blank Screen !
The Pronto screen will be blank when picked up from
the charger base.
To initiate the Pronto just Touch anywhere on the
touch screen as indicated.
No Display!
If display is dark or do not appear check contrast
dial before calling for. There is a contrast dial on
the right side of the Pronto receiver that is similar
to a volume control dial on a walkman.
*IF THE EQUIPMENT APPEARS NON RESPONSIVE...
AIM PRONTO REMOTE AT THE IR SENSOR ON THE
BACKSPLASH.
Starting up Troubleshooting
Where is the main page!
Just press on the icon that resembles a house at
the top left hand corner of any equipment menu
page. Should a display other than the main page
appear.
Advertisement
