NEC Express5800 User Manual page 81

Advanced Chipset Control
Option
Multimedia Timer
Intel(R) VT-d
Wake On
LAN/PME
Wake On Ring
Wake On RTC
Alarm
IMPORTANT:
feature is enabled, this feature is disabled at the next system boot after
AC power-on. You need to press the Power switch to boot the system. If
the AC power is turned off, Wake On Ring feature on power
management chip is disabled until the next DC power-on.
Parameter
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
[Disabled]
Enabled
[Disabled]
Enabled
If the AC power is turned off while the Wake On Ring
Description
Specify whether the system supports
the multimedia timer feature.
Specify whether the Intel(R)
Virtualization Technology for Directed
I/O feature is enabled or disabled.
This item appears only when the
processor supports this feature.
Specify whether the remote power-on
function through a network is enabled
or disabled.
Specify whether the remote power-on
function through a serial port (modem)
is enabled or disabled.
Specify whether the remote power-on
function that uses the RTC alarm
feature is enabled or disabled.
Set this option to [Enabled] to shift
from standby mode to sleep mode
after a specified time has elapsed by
using the OS power control function.
Configuring Your Server 4-15
Your Setting
[ ]: Factory-set