NEC Express5800 User Manual page 72

4-6 Configuring Your Server
Memory
To check the installed memory (DIMM board) status
Select [Advanced] - [Memory Configuration] and check the status indications.
The on-screen DIMM group numbers and socket locations on the mother board are
associated as shown in the following figure.
To clear the memory (DIMM board) error information
Select [Advanced] - [Memory Configuration] - [Memory Retest] - [Yes] and reboot.
To run power-on memory test
Select [Advanced] - [Memory Configuration] - [Extended RAM Step] - [1MB] and
reboot.
CPU
To check the installed CPU status
Select [Main] - [Processor Settings] – [Processor CPUID] and check the status
indications.
DIMM #2
DIMM #4
DIMM #1
DIMM #3